Software updates for your Elli Charger
See the latest features, technical improvements, and release notes for Elli Charger and Elli Charger 2.
Software updates improve security, stability, and everyday performance while adding new features and controls.
We recommend installing available updates to keep your charger running with the latest improvements.
Below, you’ll find release notes for both generations of the Elli Charger.
Charger 2 release notes
Changelogs and release notes for the second generation of our charger.
Expand a version to view detailed information about new features and improvements.
Elli Charger 2 (2nd generation)
New features
- New firmware introduced to ensure compliance with the “Technical and Organizational Rules for Operators and Users of Networks (TOR).” (Applies in Austria)
Connectivity & communication
- Wallbox connectivity: Improved stability of internet and backend connections
- Wallbox-to-backend communication: Improved stability of the OCPP connection and other core communication processes
- Additional general improvements
Software & user interface
- Wallbox configuration: Expanded data encryption via HTTPS access and country support, improved system information display, and optimized general handling and PUK entry
- Software updates: Improved process stability
- LED indicator: Corrected behavior and optimized display
- Wallbox settings: Improved stability after a factory reset
- Operating system: General stability improvements
Charging features & energy management
- Charging: Improved phase switching and optimized charging behavior
- Dynamic PV charging: Optimized charging behavior and improved synchronization of Modbus meter values
- Charging communication via ISO 15118: Improved charging stability and increased the ISO connection timeout
System stability & security
- Error handling: Improved error output and display, as well as charging functionality and wallbox connectivity
- Certificate handling: Improved stability of the certificate renewal process
- Ground monitoring: Improved error reporting
New features
- OCPP Open Backend: You can now manage and configure the wallbox through third-party backends. After a factory reset, the original Elli backend connection can be restored.
- Modbus server: You can now operate the wallbox as a Modbus server and use it with compatible Modbus-enabled energy management systems.
- Display and controls: Standby mode has been added. If there is no interaction for 120 seconds, standby mode is activated automatically, provided no other activity is taking place, such as charging or a software update. Standby mode is indicated by a white pulsing LED in the center of the LED bar. This helps extend the service life of the LEDs.
- Reset customer settings: This function allows you to reset all customer settings while retaining installer settings such as country, phase configuration, and current limits.
- Charging history: You can now download your charging history as a CSV file. The file contains information that can be used for documentation or analysis purposes, for example. Additional charging history information has also been added, including the most recently started charging session with units, meter start value, meter stop value, and authorization token.
Connectivity & communication
- Wallbox connectivity: Improved stability of internet and backend connections
- Wallbox-to-backend communication: Improved stability of the OCPP connection and other core communication processes
- Internal energy management: Additional languages added
- Additional general improvements
Software & user interface
- Wallbox configuration: Expanded data encryption via HTTPS access and country support, improved system information display, and optimized general handling and PUK entry
- Software updates: Improved process stability
- LED indicator: Corrected behavior and optimized display
- Wallbox settings: Improved stability after a factory reset
- Operating system: General stability improvements
Charging features & energy management
- Charging authorization: Improved stability of RFID card charging and Smart Charging
- Charging: Improved phase switching and optimized charging behavior
- Wallbox settings: Optimized default settings for PLC charging
- Control: Improved stability of the grid operator control interface (§14a)
- Dynamic PV charging: Optimized charging behavior and improved synchronization of Modbus meter values
- Smart Charging: Improved detection of profiles and values and improved phase-switching stability
- Load management: Improved local functionality
- PV optimization: PV surplus charging can now be activated through the wallbox configuration
- Modbus meter whitelist: Added meters compatible with IT grids (Eastron SDM 630 IT grid and Siemens PAC 2200 IT grid)
- Phase switching: Optimized functionality
- Grid operator control interface (§14a): When charging power is limited, the reason for the restriction imposed by the grid operator can now be viewed in the wallbox configuration
- In rare cases, a bug fix may result in an inconsistent configuration that prevents charging. If this occurs, we will perform a one-time manual correction through our internal backend. Charging can then continue as usual.
System stability & security
- Error handling: Improved error output and display, as well as charging functionality and wallbox connectivity
- Certificate handling: Improved stability of the certificate renewal process
- Ground monitoring: Disabled by default upon delivery and after a factory reset
- OCPP certificate status: Can now be viewed in the wallbox configuration
- IT security: General improvements
Connectivity & communication
- Vehicle communication: Adjusted and improved stability of communication settings
- Vehicle communication via ISO 15118: Improved stability of the communication interface
- Wallbox connectivity: Improved internet connection stability
- Wallbox-to-backend communication: Improved connection stability
- EEBUS communication: Improved EV detection
Charging features & energy management
- Charging authorization: Optimized transaction handling
- Dynamic PV charging: Optimized charging via the Home Energy Management System (HEMS) and updated values
- Smart Charging: Improved profile detection
- Charging: Improved configuration options
- Control: Improved stability of the grid operator control interface (§14a)
- Modbus meter: Expanded the list of compatible devices
System stability & security
- Overload protection: Improved stability in edge cases
- Error handling: Improved error output and display
- Certificate handling: Improved certificate renewal
Software & user interface
- Software update process: Optimized device update process
- Web configuration: Improved system information display and configuration options
- LED indicator: Corrected behavior and optimized display
Legal & general information
- Disclaimer: Updated copyright information
-
Fixed an issue where the automatic switch from single-phase to three-phase charging was not performed correctly when exiting PV surplus charging mode.
Charger release notes (1st generation)
Changelogs and release notes for the first generation of the Elli charger.
An overview of all software updates released to date for our first-generation charger.
Elli Charger (1st generation)
- Optimized the wallbox to ensure the relay opens reliably even during rapid switching, improve handling of unexpected signals, and increase voltage measurement accuracy for more reliable operation.
-
The wallbox software (v3.8.17; v3.29.12) was rebuilt based on the previous version (v3.8.13; v3.29.7) and updated with new security certificates because the previous certificates had expired.
- The wallbox software (v3.7.14; v3.25.3) was rebuilt based on the previous version (v3.7.12; v3.25.2) and updated with new security certificates because the previous certificates had expired.
- The wallbox software (v2.14.5; v3.16.8) was rebuilt based on the previous version (v2.14.4; v3.16.7) and updated with new security certificates because the previous certificates had expired.
- Improved wallbox status evaluation to increase the stability of communication between the wallbox and the vehicle.
- Implemented the EEBus communication interface, allowing you to connect your wallbox to EEBus-compatible devices. You can find more information about EEBus in the FAQs in our shop or on the official EEBus website at eebus.org.
- Improved the configuration manager, making it easier and more intuitive to set up your wallbox. This includes connecting it to the internet via Wi-Fi or, optionally, LTE.
- General improvements to make communication between your wallbox and our IT systems and backend more reliable.
- Updated the EksignCertificate to ensure continued connectivity between internet-enabled wallboxes and our IT system.
- Improved Wi-Fi connection stability
- Improved LTE connection stability
- Improved reliable transmission of kWh data
Guides & manuals
Find technical data sheets, installation guides, and certificates in our Download Center.